WiFi Switch
This Switch converts your current home to a smart home. The switch is a smart intelligent switch you can add scene, schedule, on/off by mobile and WiFi.
Specification
- Input Voltage:- 185 VAC to 265 VAC
- Output voltage: 185 VAC to 265 VAC
- Current: 10 Amp
- Power: 26500 w
- Current consumption/year : 27 INR/year
- Relay current: 10 Amp
- MTBF/Reliability data :100k hours
- Size : 52x48x24 mm
Environmental conditions
| Items | Technical Parameters | Units | Notes |
| Temperature | -25—+75 | ℃ | |
| Storage Temperature | -40—+85 | ℃ | |
| Relative Humidity | 5—95 | % | |
| Thermal Methods | Natural cooling | ||
| Pressure | 80—106 | Kpa | |
| Altitude | ≤2000 | m | |
| Vibration | Vibration coefficient 10~500Hz, 2G10min./1cycle, 60min.each along X,Y,Z axes |
Electrical characteristics
| Items | Technical Parameters | Units | Notes |
| Rated input voltage | 100-240 | Vac | |
| Max Input voltage range | 185-265 | Vac | or 70-350Vdc |
| The maximum input current | ≤0.1 | A | |
| Input inrush current | ≤10 | A | |
| Input slow start | ≤50 | mS | |
| Long-term reliability | MTBF≥100, 000 | h | |
| Output max current (Resistive load) | 32A / 250Vac | A |
Certification and Enclosure characteristics
| Items | Technical Parameters | Units | Notes |
| Pre-certified by UL | UL1012,EN60950,UL60950 | ||
| Enclosure Material | ABS/PC | ||
| Input and output Isolation | 2.5 | KV | |
| Insulation resistance | I/P-O/P>100M Ohms/500Vdc | Ohm/VDC | |
| Humidity | 70% | RH | |
| Pre Conduction and radiation | EN55011, EN55022 (CISPR22) | ||
| Electrostatic discharge | IEC/EN 61000-4-2 level 4 kV/14kV |
RF characteristics
| Items | Technical Parameters | Data Speed | Power (dBm) |
| RF Precertified | IEC/EN 61000-4-3/FCC/IC/CE/ACMA | ||
| PCB and Enclosure fire grade | 94-V0 | ||
| Transmit | 11b | 1, 2, 5.5, 11 (Mbps) | 17 |
| Transmit | 11g | 6, 9, 12, 18, 24, 36, 48, 54 (Mbps) | 15 |
| Transmit | 11n | HT20 MCS 0 to 7 | 13 |
| Receive | 11b/g/n | -70 to -91 | |
| Wi-Fi standard | IEEE 802.11 b/g/n (channels 1 to 14) |
Touch Switch Features
- The toughened polycarbonate panel, no fading, it’s easy to clean. elegant and stylish.
- Integrated panel design, waterproof and anti-creeping, it’s available to operate touch with any time.
- Fireproof, strengthen protection for the short circuit of power line.
- Touch control ensures longer service life than a mechanical switch.
- New imported IC processor for nice sensitivity and stable performance.
- Control by Single dual live and neutral wire, easy for installation, do not need rewiring and replacing the switch before directly.
- Humanized design, The switch can automatically disconnect when electricity breaks and it will be in the last on/off state when the electricity comes back.
- Applicable to common lamps, such as incandescent, fluorescent lamps, led lamps, Fan, and so on.
- Comes with LED indicator, distinguished in the darkness.
- The switch is suitable for the inductive ballast fluorescent.
